We need to learn cable diameters and duct diameters before starting to prepare your cable blowing machines.

Cable diameter can be in the range of 9-14mm or 14-18 mm. If you want it can be together in one machine by tools.

We need to learn cable diameters and duct diameters before starting to prepare your cable blowing machines.

Cable diameter can be in the range of 4-8mm or 8-12mm.If you want it can be together in one machine by tools.

Duct diameter can be in the range of 8 mm to 42 mm.

Hidrofok is designed to blow cable and tubes in ducts.

Hidrofok is working with hydraulic power unit because motors on hidrofok are working with pressurized hydraulic oil.

Hydraulic motors are making Hidrofok more powerfull then Fok design ,because hydraulic motors are more powerful then air motors in FOK also in Hidrofok all air is sending in duct but in Fok some air is using in air motor.

There are two disadvantages of  standart plastic pipe coupling devices for people who is blowing cable. One of them is coupling two pipes each other takes too much time and the other one is you can not take out plastic pipe coupling device after cable blowing inside the coupling device.You can take it out  only by cutting it means that you can use it only once.

Kösmak is designed and produced steel duct coupling devices to solve these problems.

You will work much more efficient with these tools.

The air cooler equipment is using when the ambient temperature is exceeding 20 C during cable blowing or
if there is no air cooler system in compressor you need to use air cooler.
•This equipment is working with the compressed air which is coming from compressor .
•Compressed air is working the air motor which turns the fan , and fan is cooling air which goes to the cable
blowing machine and duct.

Cable connector is using to increase the cables in duct.For example If there are 1 cables in duct you can increase it to 2 or you can
increase 2 cables to 3 cables.
If you do not use this tool you can not increase cables because you can not prevent air leaks without this tool.
You can use this tool for different ducts and cables by using parts which we give with tool.
We need to learn your ducts and cables diameters to product this device.

ELECTROFOK is designed and produced by KOSMAK MACHINE with feedbacks from users who has specialty on cable
blowing technologies. Electrofok is using to blow cables from 1mm to 3 mm. You need to give us duct diameters in your project
before ordering machine.