• Sanayi mah. İzmit Sanayi Sitesi 1.cad. No:201 Kapı no:6/8 Kocaeli / İzmit
  • info@kosmak.com

OFC Cable Blowing Machine

OFC Cable Blowing Machine

A ofc cable blowing machine takes compressed air from the processor or compressor and transmits the compressed air to the pipe and motor, thus activating the belt system in the engine. The air comes to the air motor and therefore the machine starts blowing cables through air. Air motors are strong motors powered with the help of compressed air. They enable powerful cable blowing. When you are buying an air compression cable blowing machine, make sure to check the diameter the machine supports in order to have the exact size you want out of the machine.

What Is A Ofc Cable Blowing Machine?

A ofc cable blowing machine is one of the two types of cable blowing machines. The other is a hydraulic cable blowing machine that operates with water as opposed to compressed air. An air compressed or a hydraulic cable blowing machine is needed in order to fit fiber optic cables into micro ducts or regular ducts of telecommunication cables. Different cable blowing machine types and capacities are plenty, so make sure to do your research and pick the correct one for your and your business’ needs. If your cables are thin, you need to buy a machine with a thinner diameter.

Read More

Hydraulic cable blowing machine Kosmak

A hydraulic cable blowing machine consists of two additional parts. A hydraulic power pack that provides the power the cable feeding unit needs in order to provide power properly. The cable feeding unit can not work without the hydraulic power pack. The cable feeding unit is the main component of these type of machines. It pushes the cable into the certain duct. there are plenty of different cable blowing machine types and capacities, so before making you make your purchase, make sure to do your research thoroughly and pick the correct one for your and your business’ needs. If your cables are on the thinner side, you need to buy a machine with a thinner diameter. As opposed to a machine with thicker diameter, if your cables are on the thicker side.

What Is A Hydraulic Cable Blowing Machine?

A hydraulic cable blowing machine is one of the two types of cable blowing machines. The other is a pneumatic cable blowing machine that operates with compressed air as opposed to water. A water or a pneumatic cable blowing machine is needed in order to fit fiber optic cables into micro ducts or regular ducts of telecommunication cables. A water powered machine has two additional compartments as opposed to a pneumatic one.

Read More

Fiber optic cable blowing machines

Fiber optic cable blowing machines

A fiber optic cable blowing machine is otherwise known as a cable blowing machine. This machine is designed to get fiber cables in ducts and micro ducts used in the telecommunication field. Used in the telecommunication field, these machines come in handy especially in cost reduction aspect. Different machines cater to different sized cables. So, according to how much you need and what width you need, you need to buy your machine accordingly.

How Does a Fiber Optic Cable Blowing Machine Operate?

A fiber optic cable blowing machine usually has seven parts that enable it to operate correctly. A lubrication and adjustment system, a cable guidance system, a base plate, a cable counter system in meters, a compressed air connection system, a blowing head part and lastly, a belt feeder system. These machines are either pneumatically powered or hydraulically powered. They are differentiated according to the cable diameter that they work on. So, if the cables you want to operate on are very thin cables, it is advised that you look into that when it comes to purchasing your cable blowing machine. Machines come in very handy for daily use and they help to cut back on expenses and they also get the job done flawlessly.

Read More

Where Is a Cable Pushing Machine Used?

Cable Pushing Machine

A cable pushing machine , when paired with a cable pulling machine, reduces the stress on the cable, ensuring it does not break and goes off to packaging safely. The diameters of the cable you want to push plays a huge role when it comes to picking the right machine for you and your business. This machine only requires one person to operate, therefore you and your business will require lesser workers for manual labor. Manipulation of industrial cables that have a significantly large weight and length can be very stressing and difficult. This task is impossible to accomplish without using a cable pusher.

Where Is a Cable Pushing Machine Used?

A cable pushing machine is used in industrial cable handling. A cable pusher consists of two main systems: a power pack and a logic board. The power pack provides the electricity that the machine needs in order to operate. The power pack also provides hydraulic powder with pressurized water for the machine to push cables smoothly. A cable pusher is often used in underground work or trenches. A machine always comes in handy when the job required is too difficult or too time consuming to get done via manual labor.

Read More

Cable Blowing Machine Types

Cable Blowing Machine Types

There are two cable blowing machine types. One of the two types is a hydraulic cable blowing machine, it powers with water and has two additional compartments to it. The other type of cable blowing machines is a pneumatic cable blowing machine that operates with compressed air as opposed to water. A hydraulic or a pneumatic cable blowing machine is needed in order to fit fiber optic cables into micro ducts or regular sized ducts of cables that are to be used in the telecommunication field. A cable blowing machine will maximize the efficiency of your business.

Cable Blowing Machine Diameters

Another way to differentiate between cable blowing machine types is when we look into the diameter of the machine. The diameter of the capacity a cable blowing machine ranges between 6 millimeters to 32 millimeters, which is between 0.25 to 1.25 inches. The speed of the cable blowing is also another factor when it comes to installing the cable. An example of speed is 90 meters per minute, which is 300 feet per minute. The diameter in which the machine operates is one of the key factors that should be looked into when buying a cable blowing machine.

Read More

What Does A Cable Blowing Machine Do?

Cable Blowing Machine

Cable blowing machine are useful machinery that are commonly used in telecommunication area. These machines make it much easier to get a job nicely done. With the use of machinery, lesser man power is needed, therefore although it will be a little costly at first, looking at the bigger picture, much less money is wasted, which accounts to bigger profit margin. These machines have been around since the 1990s and their development is uncanny. The modern designs and the flexibility they provide is amazing. Machines give us less manual labor and better quality overall.

What Does A Cable Blowing Machine Do?

Cable blowing machines are designed to fit cables into micro ducts and regular ducts. After the cable has been placed within the micro ducts or regular sized ducts, the cable is put into the blower head, which then gets connected to the chosen duct with the help of a valve. When using micro ducts, the cable gets blown in using compressed air or water. There are different motor types with these machines. The different motor types make it possible for the customer to use with a wide range of cables. Getting work done is easier than ever with these machines.

Read More
× How can I help you?