Cable Pushing Machine TURKEY

Cable Pushing Machine

A cable pusher machine is used in industrial cable handling. It is mostly used for underground work or trenches. A cable pusher consists of two main systems: a power pack and a logic board. The logic power is required to run the machine smoothly. The power pack provides the electricity that the machine needs in order to operate. The power pack also provides hydraulic powder with for the machine to push the cables effortlessly. A machine is always more useful, and it also comes in handy when the job required is too difficult for manual handling or too time consuming to get done with manual labor.

What Is a Cable Pusher Machine?

A cable pushing machine, reduces the stress that is put upon the cable, and makes sure that the cable does not break during production and that it goes off to the packaging part of the manufacturing process safely. This machine only requires one person to operate it. Because of the fact, you and your business will require less workers, therefore less manual labor, causing monetary benefit. Manipulation of industrial cables is difficult due to their heavy weight and lengthy size. The task of pushing cables is impossible to accomplish without using a cable pusher.

Read More

Characteristics of cable blowing machines

Characteristics of cable blowing machines

User-friendly design: Cable blowing machine has a simple design that makes it very easy to operate. The machine is designed with the main premise of functionality that makes cable blowing easy.

Effective blowing: blowing micro ducts into conduits-SUBCONDUCT. Cable blowing machine is a very effective cable blowing machine ideal for blowing microducts in tubes being able to blow multiple microducts at once, as well as blowing cables through larger ducts such as Tritubes. The machine is capable of blowing different combinations of tubes and micro ductwork.

Cable blowing using air or water: With a cable blowing machine it is possible to install micro ducts and fiber optic cables using both air and water. Higher pressures can be achieved in wire blowing with the help of water, which is particularly advantageous when multiple micro ducting or larger cables are installed at the same time.

Robust: Cable blowing machine has been built robustly taking into account the special conditions that sometimes exist in the place where the cable is blown.

Versatile: Cable blowing machine is very versatile as it is suitable for both micro ducting and large fiber cables. In addition the machine can be quickly adapted to blow various sizes and number of micro ducts. There is a wide variety of possible sizes and combinations in order to adapt to the sizes required in each case. Possibility to stop the machine before the cable is damaged.

Read More

Fiber Cable Blowing Machines

Fiber Cable Blowing Machines

This machine consists of a system for receiving and supplying compressed air to the pipe with the ability to supply optical cables with a diameter of 6 to 32 mm at a speed of up to 90 m / min, as well as a device for stretching the optical cable.

Compressed air is fed into the pipe according to the aerodynamic principle, and then the hydraulic cable feed system controls the process of its supply to the pipe. The electronic control system allows you to display data about the speed, distance of blowing, and information about the presence of any blockages inside the pipe.

The cable pushing machine is designed from anti-corrosion materials, equipped with a metal cart with wheels for movement, which is stable on the surface, allows you to adjust the height, and makes the process of working on this equipment more maneuverable and convenient. The hydraulic system is equipped with a gasoline engine.

A special feature of the machine is the use of a hydraulic drive for the cable feed device. If it is difficult to pass or block the cable in the pipe, the cable-pulling mechanism automatically stops working. The hydraulic drive makes it possible to blow out heavy cables.

To work with different cable and pipe diameters, the cable blowing machine is equipped with replaceable sets of the collet for cable and pipe. O-rings are additionally selected for the cable.

Read More

HYDRAULIC CABLE & TUBE Cable Blowing Machine


  • HIDROFOK is designed to blow cable and tubes in ducts.
  • You need to change palette group and some parts to modify machine from tube blowing to cable blowing or reverse.
  • HIDROFOKis working with hydraulic power unit because motors on HIDROFOK are working with compressed hydraulic oil.
  • You can use KOSMAK’s hydraulic power unit with HIDROFOK.
  • Hydraulic motors are making this machine powerfull then FOK design also in HIDROFOK all air is sending in duct so that Cable blowing machine  with HIDROFOK is easier then blowing with FOK(in FOK machine some of the air is using in air motors).By the power of HIDROFOK you can blow bigger diameter cables and lot’s of tubes together.
  • There are some disadvantages of HIDROFOK by the side of Fok design.This machine is using with hydraulic power unit (only compressor is enough in FOK machine),heavier then FOK and bigger then FOK.

Fibre Optic Cable Diameters;

You need to change palette group  and some parts to change machines cable  diameter range.

1) Diameter  9mm-14mm                     2) Diameter 14mm-20mm                     3) Diameter  20mm-25mm

Tube Diameters and Quantity;

You need to give us information about diameter of tubes and quantity of tubes that you want to blow in one time.There are some examples at below.

1) Tube Dia.=12mm / Quantity=4                   2) Tube Dia.=6mm / Quantity=7

Duct Diameters;

In standart HIDROFOK machine duct diameter is 50mm.We are producing tools for different duct diameters which is ordered from users.


HIDROFOK                                                                               : Hydraulic Fibre Optical Cable blowing machine 

CONTROL                                                                                      : By technician

NEEDED AIR                                                                                  : 12 bar 10 m³/min.(minimum)

HYDRAULIC MOTORS                                                                 : Double effective, 57 newton meter (2 pieces)

NEEDED OİL FOR MOTORS                                                         : 20 liter/min.

CABLE and TUBE BLOWING VELOCITY                                   :15 meter / minute

DIMENSIONS (width x length x height)                                         :125cm*94cm*78cm (hıdrofok and hıdraulic power  unit together)

WEIGHT OF MACHINE                                                                 : 155kg (hıdrofok and hıdraulic power  unit  together)

Read More

Cable Blowing Machine Mechanical Indicator

There are some little differences of this machine from FOK machine.This machine has extra specifications form Cable Blowing Machine;

FOK machine has one air inlet. FOK machine is dividing air into two parts ,some of the air is going to the machine (air motors), some of it is going to the duct.

This machine has three inlet , two of them is for air , one of them is for water.Part A is for water. Part B,C is for air.The air from part B is going to the duct.The air from part c is going from machine (air motors).Part A is for water inlet.You can give water to the duct from there to reduce friction between duct and cable.Water pump is useful in this job also air is bringing water in duct.By using this you can blow much more meters cable in one time.

Dimensions =370 * 680 * 400

Weight = 55 kg

This machine has mechanical indicator.You can see the blowed cable by mechanical indicator.

Quick connection for water and air is giving with machine.


Read More

Fiber optic cable blowing machine

Fiber optic cable blowing machine


Our standard FOK cable blowing machine production is for 40 mm duct dia. We can produce regulating parts for various diametres.These parts can be used for less diametres. For higher duct diametres exit box duct diameter must be lathed for your duct diameter.

You will need different regulating parts for different diametres. You must inform your duct diameter with your order. (Our price doesn’t include regulating parts’ prices)


We have two types of machines for cable diameters.These standard cable diameter ranges  are noted below.You must inform your cable diameter and diameter range with your order.We can send you spare parts for your various cable diameters(pallette etc.).(Our machine’s price doesn’t include these extra spare parts.)

NOTE: This enumeration (see below) is just for classify. That we can produce our machine for different cable diametres.

  1. A) Diameter 9-13                       4) Diameter 14-18


2 column news



FOK                                                                               : Fibre Optical Cable blowing machine

CONTROL                                                                                      : By technician

NEEDED AIR                                                                                  : 10.5 bar 12 m³/min.(duct 40 hdp)

AIR ENGINE                                                                                   : Double effective, 740 watt (2 pieces)

NEEDED AIR FOR ENGINES                                                       : 6 Bar-1.6m³/min.

CABLE İNSTALLİNG  VELOCITY                                              : 0, 30, 50m/min.

LAY DOWN POWER                                                                     : 80~85 Kg.

DIMENSIONS (width x length x height)                                         : 365mm x 330mm x 540mm

WEIGHT OF MACHINE                                                                 : 46kg

Read More
× How can I help you?