DrillFOK Cable Blowing Machine
Now you can depend on the same KÖSMAK quality as our larger machines in a new smaller package.
The Drill fok installs microcable and its versatility saves you money.
The design of the cable blowing machine provides for quick and easy component changes for differentcable or duct sizes.
Its compact size and portable maneuverability make the Drillfok is ideally suited for either outside or in-building use.
The Drillfok uses compressed air to install the cable. The drive roller, powered by most types of cordless drills (not included), control the microfiber as it is propelled into the microduct.
Drillfok machine takes name from drilling tool because you do not need to use a motor with this machine you only need to buy a standart drilling tool like Bosch, Dewalt.
There are two disadvantages of standart plastic pipe coupling devices for people who is blowing cable. One of them is coupling two pipes each other takes too much time and the other one is you can not take out plastic pipe coupling device after cable blowing inside the coupling device.You can take it out only by cutting it means that you can use it only once.
Kösmak is designed and produced steel duct coupling devices to solve these problems.
You will work much more efficient with these tools.
Cable connector is using to increase the cables in duct.For example If there are 1 cables in duct you can increase it to 2 or you can
increase 2 cables to 3 cables.
If you do not use this tool you can not increase cables because you can not prevent air leaks without this tool.
You can use this tool for different ducts and cables by using parts which we give with tool.
We need to learn your ducts and cables diameters to product this device.
•The air cooler equipment is using when the ambient temperature is exceeding 20 C during cable blowing or
if there is no air cooler system in compressor you need to use air cooler.
•This equipment is working with the compressed air which is coming from compressor .
•Compressed air is working the air motor which turns the fan , and fan is cooling air which goes to the cable
blowing machine and duct.
•If you do not make air cooler your duct can be damaged because of the hot wheather and also there will be
more friction between cable and duct.These thing effects your blowing distance.
•Dimensions of the equipment is 74cm *45 cm * 52 cm.
•Weight of the equipment is 40 kg
•Equipment is taking moisture in the compressed air.
•Fan is starting or stopping by the vane with handle.
•Air motor is using0.2 Meter cup / minute air and working on 6 bar.