• Sanayi mah. İzmit Sanayi Sitesi 1.cad. No:201 Kapı no:6/8 Kocaeli / İzmit
  • info@kosmak.com
_MG_2093 kopya
_MG_2096 kopya
_MG_2106 kopya
KÖSMAK MACHİNE BOX

FOK – Fıber Optıc Cable Blowıng Machıne

FOK – Fiber Optic Cable Blowing machine

We need to learn cable diameters and duct diameters before starting to prepare your cable blowing machine

Cable diameter can be in the range of 9-14mm or 14-18 mm. If you want it can be together in one machine by tools.

Duct diameter can be in the range of 20 mm to 50 mm.

FOK                                                                           : Fibre Optical Cable Blowing Machine

Control                                                                   : By technician

Needed Air to blow cable                                   : 12 bar 10 m³/min.

Cable blowing speed                                           : 50 meter in one minute.

Cable pushing force                                              : 80 Kg.

Dimensions (width x length x height)             : 37cm x 40cm x 59cm

Weight                                                                 : 46kg

Read More
_MG_2138 kopya
_MG_2136 kopya

MINIFOK – Mını Fıber Optıc Cable Blowıng Machıne

Mini Fiber Optic Cable Blowing Machine

We need to learn cable diameters and duct diameters before starting to prepare your cable blowing machines.

Cable diameter can be in the range of 4-8mm or 8-12mm.If you want it can be together in one machine by tools.

Duct diameter can be in the range of 8 mm to 42 mm.

MINIFOK                                                                  : Mini Fibre Optical Cable blowing machine

Control                                                                   : By technician

Needed Air to blow cable                                   : 12 bar 1 m³/min.

Cable blowing speed                                           : 50 meter in one minute.

Test reports PDF:

More Than 100 MiniFok Machines to ITALY FAR s.r.l.

    Read More
    hidrofok3
    hidrofok2
    hidrofok

    HIDROFOK – Cable & Tube Blowıng Machıne wıth Hydraulıc Power Unıt

    HIDROFOK – Cable Blowing Machine with Hydraulic Power Unit

    Hidrofok is designed to blow cable and tubes in ducts.

    Hidrofok is working with hydraulic power unit because motors on hidrofok are working with pressurized hydraulic oil.

    Hydraulic motors are making Hidrofok more powerfull then Fok design ,because hydraulic motors are more powerful then air motors in FOK also in Hidrofok all air is sending in duct but in Fok some air is using in air motor.

    HIDROFOK                                                              : Hydraulic Fibre Optical Cable blowing machine

    Control                                                                   : By technician

    Needed Air to blow cable                                   : 12 bar 10 m³/min.

    Cable blowing speed                                           : 50 meter in one minute.

    Cable pushing force                                              : 150 Kg.

    Dimensions (width x length x height)               : 75 cm x 75 cm x 120 cm

    Weight(with hydraulicpower unit)                    : 120 kg

     

    Hidrofok Video

    • Read More

      ELECTROFOK – Fıber Blowıng Machıne wıth Electrıc

      ELECTROFOK – Fiber Cable Blowing Machine with Electric

      ELECTROFOK is designed and produced by KOSMAK MACHINE with feedbacks from users who has specialty on cable
      blowing technologies. Electrofok is using to blow cables from 1mm to 3 mm. You need to give us duct diameters in your project
      before ordering machine.
      Machine consists on four parts as you can see in figure 1.
      *Cable blowing group is blowing cable and air in duct with controlling by electric panel.
      *You can control cable blowing speed and direction .
      *You can see the distance of cable you blown from electric panel .
      *The most important thing of machine is sensor design which prevents from breaking of cable blowing machine .
      Machine stops before breaking of cable.
      *Air regulator system is regulating air pressure in duct also you can open and close air.
      *You can put machine on desired place and height with tripod table.

      • Read More

        Mıkro FOK Cable Blowing Machine

        Mikro FOK Cable Blowing Machine

        MICRO FOK  is designed and produced by KOSMAK MACHINE with  desires from users. You can depend on the same KÖSMAK  quality as our larger machines in a new smaller package.

        The Microfok cable blowing machine installs microcable and its versatility saves you money.

        The design of the Microfok provides for quick and easy component changes for different cable or duct sizes.

        Its compact size and portable maneuverability make the Microfok is ideally suited for either outside or in-building use.

        The Mikrofok uses compressed air to install the cable. The drive roller, powered byair motors

        Cable pusher rolls can change easily.One air inlet from compressor with quick connection

        Quick connection part is giving with machine. Easily changeable for different  cables

        Easily changeable for different ducts.

        Mıcro Fok                                          = Mıcro Fıber Optic Cable Blowıng Machıne

        Control                                               = Technician

        Cable diameter                                   =3mm-6mm

        Duct  diameter                                    = Changeable by tools

        Dimensions  of  Machine                   = 35 cm * 30 cm * 45 cm

        Weight of Machine                            = 18 kg

        Needed air                                          = Minimum 12 bar  – 1 meter cup  / minute.

        Cable installing velocity                     = 0-80meter/minute

        Direction                                             =Forward and backward

        MIKROFOK PDF :

          Read More

          Cable Fleetıng Machıne

          Cable Blowing Machine

          The Fleeter replaces the manual method of “figure eighting” cable, and provides protection and security for the cable.

          Following installation of the cable in the first leg of the duct route the balance of the cable is removed from the drum and fed into the Fleeter,thereby releasing the cable end ready for blowing into the second leg.

          The Fleeter provides a smooth and simple system while ensuring cable protection from pedestrians or vehicles and prevents contamination from mud, soil or dust.

          The Fleeter is designed to work in conjunction with the Cable Blowing Machine, which provides the cable feed in and out of the Fleeter.

          The Fleeter consists of a road going trailer chassis on which is mounted a cable storage cassette, rotating cable guide quadrant and duct clamp assembly

          Read More
          × How can I help you?