Where Is a Cable Pushing Machine Used?

Cable Pushing Machine

A cable pushing machine , when paired with a cable pulling machine, reduces the stress on the cable, ensuring it does not break and goes off to packaging safely. The diameters of the cable you want to push plays a huge role when it comes to picking the right machine for you and your business. This machine only requires one person to operate, therefore you and your business will require lesser workers for manual labor. Manipulation of industrial cables that have a significantly large weight and length can be very stressing and difficult. This task is impossible to accomplish without using a cable pusher.

Where Is a Cable Pushing Machine Used?

A cable pushing machine is used in industrial cable handling. A cable pusher consists of two main systems: a power pack and a logic board. The power pack provides the electricity that the machine needs in order to operate. The power pack also provides hydraulic powder with pressurized water for the machine to push cables smoothly. A cable pusher is often used in underground work or trenches. A machine always comes in handy when the job required is too difficult or too time consuming to get done via manual labor.

Read More

Cable Pushing Machine TURKEY

Cable Pushing Machine

A cable pusher machine is used in industrial cable handling. It is mostly used for underground work or trenches. A cable pusher consists of two main systems: a power pack and a logic board. The logic power is required to run the machine smoothly. The power pack provides the electricity that the machine needs in order to operate. The power pack also provides hydraulic powder with for the machine to push the cables effortlessly. A machine is always more useful, and it also comes in handy when the job required is too difficult for manual handling or too time consuming to get done with manual labor.

What Is a Cable Pusher Machine?

A cable pushing machine, reduces the stress that is put upon the cable, and makes sure that the cable does not break during production and that it goes off to the packaging part of the manufacturing process safely. This machine only requires one person to operate it. Because of the fact, you and your business will require less workers, therefore less manual labor, causing monetary benefit. Manipulation of industrial cables is difficult due to their heavy weight and lengthy size. The task of pushing cables is impossible to accomplish without using a cable pusher.

Read More

Fiber Cable Blowing Machines

Fiber Cable Blowing Machines

This machine consists of a system for receiving and supplying compressed air to the pipe with the ability to supply optical cables with a diameter of 6 to 32 mm at a speed of up to 90 m / min, as well as a device for stretching the optical cable.

Compressed air is fed into the pipe according to the aerodynamic principle, and then the hydraulic cable feed system controls the process of its supply to the pipe. The electronic control system allows you to display data about the speed, distance of blowing, and information about the presence of any blockages inside the pipe.

The cable pushing machine is designed from anti-corrosion materials, equipped with a metal cart with wheels for movement, which is stable on the surface, allows you to adjust the height, and makes the process of working on this equipment more maneuverable and convenient. The hydraulic system is equipped with a gasoline engine.

A special feature of the machine is the use of a hydraulic drive for the cable feed device. If it is difficult to pass or block the cable in the pipe, the cable-pulling mechanism automatically stops working. The hydraulic drive makes it possible to blow out heavy cables.

To work with different cable and pipe diameters, the cable blowing machine is equipped with replaceable sets of the collet for cable and pipe. O-rings are additionally selected for the cable.

Read More

Cable Blowing Machine System

Cable Blowing Machine System

A cable pushing machine (fiber blowing system) is a tool designed to store fiber optic cables into telecommunications mechanisms using compressed air or water.

Cable blowing machine (fiber blowing system) includes of the following components:

  • The head, which guarantees the safe installation of the tube, in which the cable will be carried out and the delivery of the medium (air or water) to the tube.
  • A cable inserted into a tube through the head passes through a sealing system that prevents the medium from entering the machine.
  • Belt eater, which moves the cable to the head.
  • Base plate or frame on which the blowing machine subsystems are installed.
  • Cable guide, which is a system of bushes or rolls leading the cable to the blowing head
  • Air or water connections that supply the environment reliably to the blowing machine.
  • Meter counter, which shows the length (sometimes also the speed) of the carried out cable.
  • A control unit that allows you to control the speed of the cable insert and the power of the consumer’s promotion.

Cable blowing machines applicable for cables of external diameter above 10 mm, micro-cable blowing machines for micro-cables of external diameters below 10 mm.

Read More
× How can I help you?